Меню
| Material for shredding | Rubber, wood, Municipal solid waste |
| Number of shafts | 2 |
| Overload protection, automatic reverse (of each shaft) | Yes |
| Power consumption | 2x45 kW |
| Size of shredding chamber | 1580x1030 mm |
| Productivity | 5000 kg/h |
| Size of shredded material | 50-200 mm |
| Number of disks | 38 |
| Material of discs | Hardox 500 |
| Number of blades on disc | 3-4 |
| Height of blade | 60 mm |
| Width of disc | 40 mm |
| Turns of 1st shaft | 22-26 t/min |
| Turns o 2nd shaft | 22-26 t/min |
| Amount of oil in 1 gearbox | 28 liters |
| Overall size without hopper (WxLxH) | 5480x2400x2200 mm |
| Size of hopper (WxLxH) | 2500x2000x800 mm |
| Shredder weight | 11100 kg |
| Diameter of disc | 500 mm |
| Diameter of shaft | 180 mm |
| Belt drive | 10, 22x14 mm |
| Shaft length | 1580 mm |
| Temperature conditions | -20…+40 °C |
Shredder should be run-in without material during 5-7 minutes before shredding. At the same time, attention should be paid to the functioning of the blade elements and electrical equipment. After running in the absence of faults work can be started.
Bulky waste is loaded to the shredder using a conveyor or a crane. During operating it is necessary to constantly monitor the shredding process and pay close attention to the presence of foreign inclusions in waste (metal, stones, etc.). When detected, immediately make a temporary stop. At the end of the work, turn off the machine and visually inspect the shredder units.
